The hot air gun manufacturer instructs you to use the hot air gun:

1, guidance

Hot air gun is a kind of welding and welding tool for chip and chip integrated circuit. The hot air gun is mainly composed of air pump, linear circuit board, air stabilizer, shell and handle assembly. The 850 hot air gun with better performance adopts 850 original air pump. Has the characteristics of low noise, stable air flow, and a large amount of air is generally 27L / mm; the original linear circuit board composed of NEC, adjust the standard temperature (air adjustment curve), so as to obtain uniform and stable heat and air; the handle assembly by eliminating static materials, can effectively prevent electrostatic interference.

Due to the wide adoption of adhesive multilayer printed circuit board, special attention should be paid to the access hole during welding and disassembly, and the PCB and the access hole should be avoided. Welding temperature should be avoided when replacing components. Some metal oxide complementary semiconductors (CMOS) are particularly sensitive to static or high voltage and are vulnerable to damage. The damage may be latent, and it will take place for weeks or months. In the disassembly of such components, must be placed on the ground table, grounding the most effective way is that the maintenance personnel wear conductive gloves, do not wear nylon clothes, easy to wear electrostatic clothing.

2, operation

(1) insert the hot blast gun power plug into the power outlet, open the hot blast gun power switch.

(2) placing a strip of paper at the 250px front of the hot air gun nozzle, adjusting the wind speed switch of the hot blast gun, and observing the wind condition of the hot blast gun when the wind speed of the hot blast gun changes from 1 to 8.

(3) placing a strip of 250px at the front of the hot air gun nozzle to adjust the temperature switch of the hot air gun. When the temperature of the hot air gun varies from 1 to 8, the temperature of the hot air gun is observed.

(4) after the practice, the hot blast gun power switch is closed, at this time the hot air gun will continue to jet, and when the jet is finished, the hot air gun power plug will be pulled out.

Shenzhen Tak Hi Tech Co., Ltd. is here to introduce you, and finally I wish you a happy life!